Quad QC-24 Valve Pre Amplifier. Lancaster Gray.

Please note when purchasing QUAD valve units:

Due to global shortages QUAD Valve units are not currently being stocked locally in Australia.

ETA is around 8 -12 weeks from time of order however additional delivery delays may be experienced.

The QC Twenty Four pre amp was designed by valve supremo Tim DeParavicini - probably the finest valve amplifier designer in the world today.

Tim scoured the globe for the very finest components, with possibly the best example of this being the new 'old stock' 6111 twin triode.

A relatively new design, the QC-24 pre amplifier is both neutral and detailed. Using a military specification 6111 valve, which is so reliable, its hard-wired to the circuit board.

Everything on this pre amplifier has been designed to maintain optimum signal purity. From the relay switching to the gold-plated terminals, each component has been selected specifically for its audio performance.

The chassis is painted to match all Quad Valve Amplifiers, making it a perfect partner in all systems. For the analogue purist, the combination of a good valve amplifier and a good turntable is the closest possible approach to the original recording.

Whilst the standard QC-24 is line level only, there is an option of a solid-state phono stage which can be added when new, or at a later stage.

Optional Solid State Phono Stage for QC-24 Pre:

Select either MM or MC - must be selected during installation


Must be installed by a authorised Quad Service representative

Specifications

Valve Complement    1x 6111 twin triode
THD @ 1V RMS    <0.2%
Frequency Response    5Hz - 50kHz (+0dB/-0.5dB)
Hum and Noise    Better than -80dB
Line Stage Gain    15dB
Recommended Minimum Load    50 k Ohms
Inputs    5 x Line level
    2 x Buffered tape loops
Power Consumption    15VA maximum